English
_9
●
CONNECTIONS
The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
- Refer to the user’s manual of the additional components you are connecting for more information on those
particular components.
Connecting to a TV (VIDEO CVBS)
1
Using video/audio cables, connect the
VIDEO
(yellow)/
AUDIO (red and white) OUT
terminals on the rear of the
DVD player to the
VIDEO (yellow)/AUDIO (red and white)
IN
terminals of TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until
the Video signal from the DVD player appears on the TV
screen.
Note
- Noise may be generated if the audio cable is too close to the power cable
.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)
- The number and position of terminals can vary depending on your TV set.
Please refer to the user's manual of the TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
DVD player.
Choosing a Connection
connections
WHITE
RED
RED
WHITE
YELLOW
YELLOW
Video
Cable
Audio Cable
Summary of Contents for DVD P191 - MULTI REGION CODE FREE DVD PLAYER. THIS PLAYER PLAYS DVDS
Page 104: ......
Page 140: ...AK68 01762A 03 ...