10
CONNECTIONS
9
Connection of the TV monitor
Connection for better sound
The following show examples of connections commonly used to connect the
DVD player with a External Source.
Connecting to an amplifier with Dolby Pro Logic support.
TV monitor
What is Dolby Pro Logic?
Using five speakers, it recreates the original sound of
the music or audio and provides the sense of pres-
ence, as if you were in a movie theater or concert hall.
AMPLIFIER
•
When playing a DTS disc, no sound is produced. In such case, use an amplifier equipped with a DTS
decoder.
•
When playing back a 5.1 channel encoded DVD, sound is output from the center and rear speakers only.
•
When playing back a 2 channel encoded DVD, CD, tape, or tuner, no sound is output from the center and
rear speakers.
Note
METHOD 2
Scart ...............
Better Quality
If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
METHOD 1
Composite Video ...............
Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the sys-
tem to the VIDEO IN jack on your television.
VIDEO SELECT Function
Press and hold VIDEO SEL. button on the remote control for over 5 seconds.
•
"
COMPOSITE
" or "
RGB
" will appear in the display.
At this time, press the VIDEO SEL. button shortly to select between "
COMPOSITE
" and "
RGB
".
•
If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.
You can get a better picture quality by using Scart setting.
•
If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE mode.
1p~30p K105-115 2006.8.8 8:37 AM Page 12
Summary of Contents for DVD-K115
Page 30: ......
