R
ecording
English - 79
Recording from external
equipment you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the HDD or DVD button.
If you select DVD, press the OPEN/CLOSE button and
place a recordable disc on the disc tray. Press the
OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 76)
2
Press the INPUT SEL. button to select the input
source according to the connection you made.
The front panel display changes in the following
sequence:
➞
PR Number
➞
AV1
➞
AV2
➞
AV3
➞
DV
If you connect a digital camcorder, press the
INPUT SEL. button to select DV. (See page 80)
3
Press the REC MODE button repeatedly, (or press
the REC MODE button, then press the
…†
buttons)
to select the recording speed (quality).
➞
SP
➞
LP
➞
EP
➞
XP
4
Press the REC button.
Information concerning the external input mode is
displayed on the screen, then recording begins.
Icon(
) is displayed on the front panel.
- To pause recording -
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the
PROG (
) buttons while recording pauses.
- To stop recording -
Press the STOP (
) button to stop or finish a
recording in progress.
• When using DVD-RW/-R discs, the message
“Updating the information of disc. Please wait for a
moment” is displayed.
Before you start
Record Mode SP(35:12)
HR733-HR738_XEU_59~88 6/23/06 10:28 AM Page 79
