background image

REFERENCE

46

47

Troubleshooting

Before requesting service (troubleshooting), please check the following.

No operations can be
performed with remote.

The screen ratio cannot
be changed.

No audio.

Play mode differs from the
Setup Menu selection.

Disc Menu doesn’t appear.

The      icon appears on
screen.

Forgot password

If you experience other
problems.

5.1 channel sound is not
being reproduced. 

Disc does not play.

•  Check the batteries in the remote. May need replacing.
•  Operate the remote control at a distance of no more than 20 feet.
•  Remove batteries and hold down one or more buttons for several

minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.

•  Ensure that the disc is installed with the label side facing up.
•  Check the region number of the DVD.

•  5.1 channel sound is reproduced only when the following conditions

are met. : 

1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.

•  Check whether the disc being played has the “Dolby 5.1 ch” mark

on the outside.

•  Check if your audio system is connected and working properly.
•  In a SETUP Menu, is the Audio Output set to Bitstream?

•  The features or action cannot be completed at this time because:

1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is

out of range.

•  Check if the disc has a Menu.

•  Some of the functions selected in the Setup Menu may not work

properly if the disc is not encoded with the corresponding function.

•  The Screen Ratio is fixed on your DVDs.

•  Make sure you have selected the correct Digital Output in the Audio 

Options Menu.

•  Press power on from a cold start with no disc in the unit. Press the

STOP (      ) and PLAY (       ) buttons simultaneously on the front panel
for three seconds. The Select Menu Language display will appear.
Select the desired language button. Press the MENU button on the
remote control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to select
Parental. Press ENTER and the Create Password display will appear.
You can now set your rating level and change your password to a new
number.

•  Go to the contents and find the section of the instruction book that

contains the explanations regarding the current problem, and follow
the procedure once again.

•  If the problem still cannot be solved, please contact your nearest

authorized service center.

Action

Problem

Page

P4

P7

P12

P41

P18

P38~39

P38~44

P42~43

P41

P44

Controlling a TV with the Remote

The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.

e.g) For SAMSUNG 4 TVs

While holding down the TV POWER button, 
enter 0 and then 1.

The remote may not be able to control every model
TV of the brands listed.

NOTE

Turn on the TV.

Point the DVD’s remote at the TV.

While holding the TV POWER button
down, enter the code for your brand.

1
2

3

If the TV turns off, setup is complete.

Enter other codes of the same brand
if the first code does not work.

To operate the TV, use the “TV Function
Buttons” described on page 11.

4

5

CODE

BRAND

01

SAMSUNG_4

02

SAMSUNG_6, LG, LOEWE, PHILIPS, 
FINLUX, YOKO, LOEWE OPTA,
MITSUBISHI, PHONOLA, RADIOLA, 
SCHNEIDER

03

SAMSUNG_1

04

SAMSUNG_2

05

SAMSUNG_3

06

SAMSUNG_5

07

TOSHIBA

08

PANASONIC_4

09

GRUNDIG, BLAUPUNKT, SIEMENS

10

SHARP

11

HITACHI

12

SANYO, AKAI, FISHER

13

HITACHI, SABA, THOMSON, NORDMENDE

14

HITACHI, NORDMENDE, SABA, 
TELEFUNKEN, THOMSON, BRANDT,
FERGUSON, PIONEER, TELEAVA

15

SONY

16

TOSHIBA, SANYO, SHARP, SONY, 
MITSUBISHI

17

TOSHIBA, GRUNDIG, FINLUX

18

TOSHIBA

CODE

BRAND

19

TOSHIBA

20

PHILIPS, PHONOLA, RADIOLA

21

TOSHIBA, GRUNDIG, CGE, 
IMPERIAL, MIVAR

22

PHILIPS, SABA, BANG&OLUFSEN, 
BRIONVEGA, FINLUX,
FORMENTI, LOEWE OPTA, METZ, 
WEGA, PHONOLA, RADIOMARELLI,
SINGER, SINUDYNE

23

NOKIA, PANASONIC, SABA, PIONEER, 
REZ, SELECO, SALORA

24

HITACHI, NORDMENDE, PANASONIC,  
SABA,TELEFUNKEN, THOMSON, 
CONTINENTAL, EDISON

25

PANASONIC_2

26

PANASONIC_3

27

PANASONIC_6

28

TELEFUNKEN

29

MIVAL

30

LG_2

31

SHARP_2

32

JVC

33

THOMSON ASIA

34

THOMSON ASIA

TV Codes

Summary of Contents for DVD-HD935



























Reviews: