English
19
Installation
A
2.
Insert one end of the accessory hose
(long drain hose) into
hole (A)
.
3.
Insert the other end (outlet) of the
accessory hose to the drainage system
in one of the following ways:
Over a wash basin:
C
B
A
1.
Make sure to place the end of the
accessory hose lower than
90 cm (*)
from the bottom of dryer.
2.
To bend some point of the accessory
hose, use the supplied plastic
hose
guide (B)
and secure the guide to the
wall with a hook or to the tap with a
piece of string. Assemble the
drain hose
(A)
and the
hose guide (B)
and fix them
with the
cable-tie (C)
.
3.
You can drain the condensed water by
connecting the accessory hose (long
drain hose) to the drain-outlet directly.
CAUTION
Do not extend the drain hose. Water may
leak from the connected area. Use a long
drain hose.
Untitled-3 19
1/25/2017 1:16:36 PM
