Disassembly and Reassembly _ 15
Part Name
Figure
Description
Frame Front
1.
Unplug the unit.
2.
Remove Top Cover.
3.
Remove Control Panel.
4.
Remove 4 screws from the Plate(U).
5.
Remove 2 screws from the Frame Front.
6.
Separate Door-Switch Housing.
7.
Lift and Frame Front off the 3 tabs across the
bottom and remove.
After reassembly check Frame Panel fixed
on the Frame well, and Door-Switch work
properly.
Drum Front
1.
Unplug the unit.
2.
Remove Top Cover.
3.
Remove Control Panel.
4.
Remove Frame Front.
5.
Remove Plate(U).
6.
Remove Drum Front retaining 5 screws.
7.
Disconnect Moisture Sensor Wiring Harness.
8.
Lift Drum Front from Cabinet and remove.
Moisture Sensor &
Incandescent Lamp
1.
Unplug the unit.
2.
Remove Top Cover.
3.
Remove Control Panel.
4.
Remove Frame Front.
5.
Remove 1 fixing screws from Touch Sensor
& Removal Touch Sensor.
After reassembly check the Touch Sensor
work properly through test mode.
