Samsung DV56H9100EV, User Manual

Page: 25 / 132

English - 25
rack Dry
Using the drying rack
1. The drying rack is installed in the drum at in default state.
2.
When using this dryer for the first time, remove the drying rack from the drum. Pull upwards
vertically and take the drying rack out of the drum. Remove the package and keep it properly
stored.
3. When you need to use drying rack, refer to the following steps for installation.
Installing the drying rack
1. Open the dryer door.
2. Place the Drying Rack inside the product, and then align the holes of the filter handle of the
Drying Rack to the front projections.
3. Place the rear legs in the two recessed areas of the dryer’s back wall, and then push down
the middle of the drying rack to fix it in place.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6.
Press the RACK DRY button in Time Dry cycle, and then select the time according to the
moisture and weight of item.
Door
Drying Rack
Place the Drying Rack inside the dryer, align the holes of the filter handle of the Drying
Rack with the front projections, and then secure the back of the Drying Rack.
SUGGESTED ITEMS SUGGESTED TEMP. SETTINGS
Washable sweaters
(block to shape and lay flat on rack)
Extra Low (Time Dry cycle)
Stuffed toys
(cotton or polyester fiberfilled)
Extra Low (Time Dry cycle)
Stuffed toys
(foam or rubber-filled)
Air Fluff
Foam rubber pillows Air Fluff
Sneakers Air Fluff
Don’t dry the drying rack together with the package when using the drying rack.
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
and create a fire hazard.
In case this model is not supplied with a Drying Rack, you can purchase it through a service
center.
Warning
02 oper
ating instructions, tips
DV9100HA-DC68-03170K-12-EN.indd 25 2018/11/19 14:14:36