background image

42  English

O

per

ations

Operations

Manual Dry cycles

Cycle

Description

QUICK DRY

• 

Provides a 30 minute drying cycle.

TIME DRY

• 

Allows you to select a cycle time in minutes. 
(If this cycle is selected, the Eco Dry function is enabled by 
default. For more information, refer to the description of the 
“Eco Dry” option.)

Steam Dry cycles

Cycle

Description

REFRESH

• 

Best for smoothing out wrinkles and reducing odors from 
loads consisting of one to four dry items. In this cycle a small 
amount of water is sprayed into the dryer drum after several 
minutes of tumbling with heat.

WRINKLE AWAY

• 

Removes wrinkles from clothes stored in closets, etc. 

      

It provides wrinkle release via optimized steam care. 

      

For best results, load 2-3 items at once.

      You can extend the drying time by a minimum of 20 minutes, 

depending on the item type or load.

STEAM SANITIZE

• 

Sanitizes garments by infusing high temperature heat deep 
into the fabric and injecting steam during the drying cycle. 
This cycle can make clothes soft and remove bad odors after 
drying.

DV7700J-03170Q-01_EN-US.indd   42

2015/4/9   16:22:42

Summary of Contents for DV48J7700E Series

































































Reviews: