Installation
Installation
English
18
• Insert the power cord with a UL-listed strain relief through the hole provided in the
cabinet near the terminal block.
• A strain relief must be used.
• Do not loosen the nuts already installed on the terminal block. Be sure they are tight.
• Use a 3/8” (1 cm) deep well socket.
STEP 2
Level the dryer
Before you install the dryer, make sure you have read Installation requirements on
page 9. Please note that the following instructions are for installation without using a
drain hose. For instructions for using a drain hose, see the next section, Drain hose (if
necessary). For convenience, consider installing the dryer next to your washer.
A
B
1.
Gently put the dryer on the desired
location.
2.
Use a
level (A)
and check the levelness
of the dryer from side to side and front
to back.
3.
If the dryer is not level, adjust the
levelling leg (B)
. Turning the leg
counter-clockwise retracts the leg.
Turning the leg clockwise extends the
leg.
4.
Once the dryer is level, make sure the
dryer stands firmly on the floor.
5.
Plug in the dryer.
DV6850N_DC68-03650E-00_EN.indd 18
2018/9/17 9:06:38
