10 _ Removal and Reassembly
3-2. STANDARD DISASSEMBLY DRAWINGS
To avoid risk of electrical shock, personal injury or death, disconnect the power to the Clothes Dryer.
► This is a standard disassembly diagram and may differ from the actual product.
Use this material as a reference when disassembling and reassembling the product.
Part
Figure
Description
Top Cover Removal
1. Disconnect Power Supply to Unit.
2. Remove 2 screws Top-Cover.
3. Slide Top Cover towards the rear and lift from the
unit.
Scratch and impact to top cover prohibited.
Main PCB Removal
1. Disconnect the power supply and to the unit.
2. Remove the Top Cover.
3. Remove 3 screws from the frame+plate.
4. Remove the Wire holder.
5. Remove the Housings.
Shaking the heater terminal side ways to pull it
out is prohibited.
6. Remove 1 screw from the Holder PCB.
