23
CHAPTER THREE
Operation
3
Memorizing Channels
Before you can use any of the special channel buttons (
CH
/
,
FAV.CH
,
PRE.CH
), the antenna you wish to
use must be scanned for available channels.
1
Press the
MENU
(
) button on your remote control.
2
Use the
/
buttons to select the
Channel
menu and press the
ENTER
(
) button.
Use the
/
buttons to select
Auto
Program
and press the
ENTER
(
)
button.
3
Use the
/
buttons to select an
antenna and press the
ENTER
(
)
button.
“Auto Channel in Progress.” will
be displayed while your available
channels are scanned. Upon
completion, your Set-Top Box will
store all the available scanned
channels.
NOTES
• Your Set-Top Box MUST be connected to an antenna in order to receive
digital TV signals.
• Even if a specific channel is removed from the memory, you can always tune
to that channel directly by using the
NUMERIC
buttons on your remote
control.
• If you wish to stop scanning in the middle of the scanning process, press
the
ENTER
(
) button to select the stop command, and then press the
ENTER
(
) button to select
OK
.
• If you have changed the connected antenna, use the
ANTENNA
button
on your remote control to change the selected antenna after scanning
completes.
23
2006-10-12 ｿﾀﾈﾄ 1:13:40
