Samsung DS-5064 User Manual Download

Page: 35 / 91

PAGING AND MESSAGING

MAKING AN INTERNAL PAGE

To make an announcement through the keyset speakers in the idle condition:

•

Lift the handset.

•

Press the

PAGE

button or dial

•

Dial the desired zone number

0, 1

•

After the attention tone, make your announcement.

NOTES
1.

If you have a dedicated page zone button, it is not necessary to press

PAGE

and dial a zone number.

If allowed by your system administrator you may be able to initiate a page
from a speakerphone by pressing the

PAGE

key or dialing

without lifting

the handset.

MAKING AN EXTERNAL PAGE

To make an announcement through the external paging speakers:

•

Lift the handset.

•

Press the

PAGE

button or dial

•

Dial the desired zone number

8 or

dial

to page all external zones.

•

After the attention tone, make your announcement.

NOTES
1.

If you have a dedicated page zone button, it is not necessary to press

PAGE

and dial a zone number.

If allowed by your system administrator you may be able to initiate a page
from a speakerphone by pressing the

PAGE

key or dialing

without lifting

the handset.

ALL PAGE

To page all designated keysets in internal zone 0 and all external zones at the same
time:

•

Lift the handset.

•

Press the

PAGE

button or dial

•

Dial

or press the

ALL PAGE

button.

•

After the attention tone, make your announcement.

NOTES
1.

The LED on the

PAGE

button will only light when an All Page is in progress.

ds_phones.qxp 5/27/2009 3:55 PM Page 34

Summary of Contents for DS-5064




























































































Search results

Summary of Contents for DS-5064

Reviews:

Related manuals for DS-5064

Brands by name

Popular brands

Samsung DS-5064, User Manual

Search results

Summary of Contents for DS-5064

Reviews:

Related manuals for DS-5064

Brands by name

Popular brands