Samsung DP700A7D-A03US User Manual Download Page 69

Page: 69 / 134

Chapter 3.

Using the computer

Wired LAN

To access the Internet at home, set up an account with an Internet

service provider (ISP).
To purchase Internet service and a modem, contact a local ISP.

Some features or procedures may differ depending on the

•

model.
These descriptions are written for Windows 8.1, so some

•

figures and descriptions may differ from your operating

system. Since the procedures for other Windows operating

systems are similar, use the computer referring to these

descriptions.

Connecting to a Wired LAN

Connect the LAN cable to the wired LAN port.

On the desktop, open the Charms and select the

Settings

charm

Control Panel > Network and Internet > Network

and Sharing Center > Change adapter settings

Summary of Contents for DP700A7D-A03US







































































































































Search results

Summary of Contents for DP700A7D-A03US

Reviews:

Related manuals for DP700A7D-A03US

Brands by name

Popular brands

Samsung DP700A7D-A03US, User Manual

Search results

Summary of Contents for DP700A7D-A03US

Reviews:

Related manuals for DP700A7D-A03US

Brands by name

Popular brands