background image

132

133

Chapter 6 

Appendix

Share

This refers to setting a resource of a computer such as a folder or 

printer so that other users can also use it.

Shared Folder

A folder that can be used by other users on the network.

Sleep Mode

A power mode that enables computers to save power consumption 

when they are not being used. When a computer is in Sleep Mode, 

the data on the computer memory is not saved to the hard disk. If 

the power is turned off, the data in memory will be lost.

System File

System Files refer to files that are read and used by the Windows 

operating system. In general, system files must not be deleted or 

moved.

TCP/IPv4

This is a 4 byte (32 bit) address system separated into each byte  

(8 bits) by a dot and each byte is represented as a decimal number.

USB 

(Universal Serial Bus)

This refers to a serial interface standard developed to replace the 

conventional interface standards such as Serial and PS/2. 
The data transmission specifications are one of the interface 

standards used to connect a computer to peripheral devices.  

These specifications include USB 1.0, 1.1, 2.0 and 3.0. 
It is appropriate to support peripheral devices that require high 

data rates such as an AV device, secondary HDD or CD-RW.  

The higher the version (e.g. USB 3.0), the higher the data rate 

provided.

Windows Media Player

A multimedia program included with Windows. Using this 

program, you can play a media file, create an audio CD, listen to a 

radio broadcast, search and manage media files, and copy files to a 

portable device, etc.

Glossary

Summary of Contents for DP700A7D-A03US







































































































































Reviews: