OPERA
TION
Charging the Jet Bot
Before using the Jet Bot for the first time, charge it completely. (For the charging time and
cleaning time, refer to the ‘Product specification’.)
1
Open the upper cover of the Jet Bot and
remove the white gasket.
OFF
ON
2
Remove the yellow gasket attached to the
power switch at the side of the Jet Bot and
press the power switch to turn the Jet Bot
on.
– During booting, the Jet Bot’s Status
Indicator turns on with a melody which
stops when the booting is complete.
– When you turn the Jet Bot on for the
first time after purchase, check the
SmartThings App connection (refer to
p.30-34) and installation of the Clean
Station following the voice guide of the
Jet Bot.
3
Place the Jet Bot on the Clean Station
manually to start charging.
– Make sure the charging terminals on the
Jet Bot and the Clean Station are aligned.
– When the Jet Bot starts charging, the
Status Indicator of the Clean Station
turns white and after 1 minute, the
Status Indicator turns off automatically.
(Charging continues though the Status
Indicator has turned off.)
OPERATION
English
14
VR8500_EN_00858K-00_EU.indd 14
2021-12-01 오전 10:32:36
