6_
operating the cleaner
Operating the cleaner
operating the cleaner
_7
HEIgHT AdjUSTMENT
The Powerfoot/Rotating Floor Brush can be adjusted to clean several floor surfaces.
1. Turn Height Adjustment Knob to desired setting.
Lowest Setting
– For bare floors.
Medium Settings
– For short and medium pile carpets.
Highest Setting
– For plush pile carpet
Note:
For optimal cleaning performance, adjust to the lowest practical setting.
If your cleaner is difficult to push, adjust to the next higher setting.
TRANSpORTINg clEANER
1. To move your cleaner from room
to room, put the Handle in the
upright position, tilt the cleaner
back on its rear wheels and push
forward.
2. The cleaner can also be moved
by using the Carrying Handle located
on the top of the Dust Bin.
pOwER SwITcH
The Power Switch is located on the side of the vacuum.
Push the rocker switch "ON" to vacuum, and "OFF"
when cleaning is complete.
1. Upright
– For storage and above floor cleaning with tools.
2. Normal Cleaning
– Press handle release pedal once. Position used for
most household floor cleaning tasks.
3. Low Cleaning
– With the vacuum in normal cleaning position, press
handle release pedal again. Use for reaching under
low furniture such as tables, chairs or beds.
HANdlE pOSITIONS
Press the handle release pedal, located on the lower left side of the vacuum, with
your foot to place your vacuum
into one of three cleaning positions.
Carrying
Handle
Summary of Contents for DJ68-00450F
