Samsung DCS, User Manual

Page: 14 / 33

with another extension:
• Hookflash and receive transfer tone. Your call is placed on trans-
fer hold.
• Dial an extension number.
• Consult with the internal party.
• Hookflash to return to the outside party or hang up to transfer the
c a l l .
NOTE: Repeatedly pressing the hookflash will flip-flop between the
outside and inside parties (except if the destination station is set
for Auto Answer or Voice A n n o u n c e ) .
TRANSFER RING CALLS
Transfer is used to send any call to another extension in one of two
ways. You can perform a screened transfer by informing the other
extension who is calling or you can perform a blind transfer without
n o t i f i c a t i o n .
• While you are speaking on a call, hookflash to receive transfer dial
tone and then dial an extension number. Your call is automatical-
ly put on transfer hold.
• Hang up when you hear ringing – OR – wait for the party to
answer and advise the party of the call and then hang up. If the
transfer is refused, you will be reconnected to the outside line
when the station hangs up or you can hookflash to return to the
outside party.
NOTE: After the inside party answers, you may alternate back and
forth between the parties by hookflashing.
TRANSFER WITH CAMP-ON
When you are transferring a call to another station and it is busy, you
may camp the call on to this station:
• While you are speaking on a call, hookflash to receive transfer dial
10
SLT 99.1.20 3:28 PM
∆
‰¿Ã¡ˆ13