DCS-VIP Internet Keyphone
Quick Guide
— 28 —
The Phone Number is the number that has already been configured in the Slave router (529472
in the examples shown in Figs. 1 and 2) and should include the area code. The Router Login
Name and Password are the same as those configured on the PPP Incoming Security Setup page
for the Slave router (Fig. 3).
Note
The name and password fields can be left blank if no security is required, but they must match the existing
settings for the Slave router.
The WAN IP Address and Network Mask should be set to 0.0.0.0 as shown. Click the
Next
but-
ton to review the options you have selected (Fig. 6).
Fig. 6
If the settings are correct, click the
End
button. If an error has been made, click the
Prev
but-
ton to go back and enter the correct data.
IP Static Route Setup
Once the Wizard is completed, it is necessary to set up an IP static route to the Slave router. In
the Advanced Router menu, select the IP Static Route Setup page. On this page, select Channel
1 in the Channel Selection field (Fig. 7).
Fig. 7
