DCS-VIP Internet Keyphone
Quick Guide
— 14 —
Set the following parameters.
l
IP Address:
Enter the IP address of the router.
l
Subnet Mask:
Enter the subnet mask of the router.
l
Connect To
: Select the connection for the DCS-VIP (ISP or Remote Router)
−
ISP Connection: Connect to ISP.
−
Remote Router Connection: Connect to remote routers such as branches and
headquarters.
l
DHCP Server
: Choose whether to use the DCS-VIP as a DHCP server.
−
Enable: Select to allocate the IP addresses in the PCs connected to the DCS-VIP.
−
Disable: Select not to use the DHCP function. If you select "Disable", the network
administrator should set up network information, including the IP addresses in con-
nected PCs.
l
ML-PPP (Multilink PPP):
ML-PPP is the protocol that combines more than two ISDN B
channels into one PPP (128Kbps). Select "Enable" to use the ML-PPP function.
l
Number of Channels
: Select the bandwidth (64K/128K) for the ISDN line. If you select
128K, you are using two different B channels at the same time. Thus, phone charges will be
doubled.
Click the
Next
button.
Router Wizard Setup
Router Wizard Setup -- Setup 2
Setup 2
On this screen you can enter information about the ISP or the remote node to which you are
connecting.
¶
¶
For ISP Connection
For ISP Connection
If you chose ISP for the
Connect To
parameter on the Router Wizard Setup - Setup 1 screen,
the following parameters will be displayed.
