DCS-VIP Internet Keyphone
Quick Guide
— 12 —
In the
Day
field, set the station telephone number to ring for incoming calls on each trunk. For
example, to set station 208 to ring for calls on trunk 704, click the dropdown button to the right
of
Trunk No. 704
and select 208. Then, click the
Next
button.
DID Digit
DID Digit
This screen appears only if you set
DDI
as the
ISDN
Mode
parameter on the
ISDN Option
screen. You can program a station (or a group) to ring directly from an external incoming tele-
phone call.
Set the following parameters.
l
Incoming digit
: Enter the DDI digits to be matched when you want to ring a station di-
rectly from the e xternal network.
l
Type
: Set the type of the station to ring.
−
STN: Ring a specified station.
−
SGRP: Ring a station group.
−
TGRP: Ring a trunk group.
−
B: When B is selected, the number of digits shown in the “Delete Count” field will be
deleted and the resultant number matched to an extension, station group, etc.
l
Destination
: Select the station to ring when you select ‘STN’ in the ‘Type’ parameter.
l
Delete Count
: Enter the number of digits to be deleted when you select ‘B’ in the ‘Type’ pa-
rameter.
Click the
Next
button.
MSN Digit
MSN Digit
This screen appears only if you set
MSN
as the
ISDN
Mode
parameter on the
ISDN Option
screen. You can make a transfer table to use BRI trunks in the MSN (Multiple Subscriber Num-
ber) mode.
