Samsung DCS 400SI, User Manual

Page: 57 / 83

CONTENTS
4.2.7
•
MANUAL RETRY with LNR—When you make an outside call and receive a
busy signal you can press the LNR key to redial the same number again. This
operation can be manually repeated for a limited number of attempts as defined
by system programming (available to keyset users only).
•
MEMO REDIAL—When you are calling directory assistance you can store the
number you are given using the dial pad and SAVE number feature. There is no
need for a pencil and paper (available to keyset users only).
•
SAVE NUMBER REDIAL—Any number dialed on a C.O. line may be saved for
redial at a later time.
REMOTE HOLD
When you wish to place a call on hold at another station, press TRSF and dial the
station number (or press the appropriate DSS key). Press the HOLD key. This will
place the call on system hold on an available CALL button or Line Key at the
remote station.
RING MODES
Each keyset user can select one of three distinct ways to receive intercom calls.
The phone can automatically answer on the speakerphone, voice announce through
the speaker or receive ringing. When the ring mode is selected, keyset users can
choose one of eight distinct ring tones. Forced Auto Answer is invoked by the
calling station and is controlled by the calling station’s class of service.
RINGING PREFERENCE
Lifting the handset or pressing the speaker button automatically answers a call
ringing at the keyset. Using this method, users are assured of answering the oldest
call first. When ringing preference is turned off, the user must press the flashing
button to answer. Users may answer ringing lines in any order by pressing the
flashing button.
SPEAKERPHONE
LCD 24B, STD 24B, LCD 12B and Basic 12B keysets have a built-in speaker-
phone. The speakerphone enables calls to be made and received without the use
of the handset.
STATION LOCK
With a programmable personal station passcode, any keyset or single line station
can be locked and unlocked to control use of each telephone. There are two lock
options: 1 = LOCKED OUTGOING and 2 = LOCKED ALL CALLS. See the follow-
ing table for more details.