Samsung DCS 400SI User Manual Download Page 13 | Manualshive

Page: 13 / 83

background image

CONTENTS

24 SINGLE LINE INTERFACE (D24SL)

This card is a twenty four circuit analog station interface for industry standard single line
telephones or other analog peripheral devices. The 24 SLI does NOT contain any over-
voltage protection and does not qualify as OPX. It can be inserted into any universal card
slot. Each D24SL uses 24 ports.

KEYSET DAUGHTERBOARD –DLI (KDb-DLI)

This is a small daughterboard that can be installed inside any 24 or 12 button DCS keyset.
The KDb-DLI will provide one additional DLI circuit for the connection of any digital station
device such as a keyset, add-on module, SIM or DPIM. This KDb-DLI will only operate
when the keyset is connected to a DLI card that is set for 2B+D operation so it can use the
second B channel. The KDb-DLI can not be installed in a 7B keyset.

KEYSET DAUGHTERBOARD–SLI (KDb-SLI)

This is a daughterboard that can be installed inside any 24 or 12 button DCS keyset. The
KDb-SLI will provide one additional SLI circuit for the connection of any standard tele-
phone device. This KDb-SLI will only operate when the keyset is connected to a DLI card
that set for optioned for 2B+D operation so it can use the second B channel. The KDb–SLI
can not be installed in the 7B keyset.

NOTE: The circuitry on a KDb-SLI does not provide a physical loop open disconnect
signal or have the overvoltage protection necessary for OPX operation.

AUTO ATTENDANT / UCD (DAAUP)

This optional card can be used for either the Automated Attendant, Uniform Call Distribu-
tion or a combination of both. Each DAAUP card provides 8 ports of automated attendant
and memory for four (4) minutes of recorded announcements for either AA or UCD opera-
tion. A maximum of 5 DAAUP cards can be installed in either a single or two cabinet
system. For more information about the Automated Attendant and UCD,

see section 4.1

System Features

.

MISCELLANEOUS APPLICATIONS PROCESSOR 1 (DMAP1)

The optional DMAP1 card provides the following miscellaneous functions in addition to
those that are on the DCCP card.

1. Four engine chips with embedded DSPs that provide 16 DTMF receivers.

2. Connectors for ONE daughterboard that can be one of the following:

a. D4SWD capability (Provides 16 additional DTMFR)
b. DR2CID capability (Provides 16 channel DSP for CID)

3. Miscellaneous functions:

a. Two External MOH Volume Control
b. Two RS232C 9 Pin Serial Input/Output

2.4

«
...
11
12
13
14
15
...
»

Summary of Contents for DCS 400SI




















































































Reviews:

No comments

Related manuals for DCS 400SI

Brand: Aastra Pages: 2

Brand: Paradyne Pages: 4

KX-T7400 Series

Brand: Panasonic Pages: 1

Brand: X-Micro Pages: 57

Brand: Gigaset Pages: 27

Brand: Southwestern Bell Pages: 24

Brand: NEC Pages: 190

Brand: AT&T Pages: 99

Brand: Grundig Pages: 70

Brand: BELGACOM Pages: 37

Brand: Vertical Networks Pages: 37

Brand: BellSouth Pages: 26

Brand: Telstra Pages: 46

Brand: FunkTronic Pages: 23

Brand: BT Pages: 68

Brand: Medion Pages: 256

Brand: G-TEL Enterprises Pages: 2

-29271RE3 - Nostalgic Retro Phone

Brand: RCA Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands