Samsung DB32E User Manual Download

Page: 94 / 205

White Balance

MENU

→

Picture

→

White Balance

→

ENTER

Picture

White Balance

The displayed image may differ depending on the model.

2 Point

Adjust the color temperature for a more natural picture.

•

R-Offset

G-Offset

B-Offset

: Adjust each color’s (red, green, blue) darkness.

•

R-Gain

G-Gain

B-Gain

: Adjust each color’s (red, green, blue) brightness.

•

Reset

: Suitable for environments where videowall display are used.

10 Point

Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

•

10 Point

(

Off

)

―

Level

Red

Green

Blue

and

Reset

are enabled only when

10 Point

is set to

•

Level

: Select interval to adjust.

•

Red

: Adjust the red level.

•

Green

: Adjust the green level.

•

Blue

: Adjust the blue level.

•

Reset

: Suitable for environments where videowall display are used.

―

Some external devices may not support this function.

―

Enabled when

Picture Mode

is set to

Office & School

(

Video/Image

Summary of Contents for DB32E














































































































































































































Search results

Summary of Contents for DB32E

Reviews:

Related manuals for DB32E

Brands by name

Popular brands

Samsung DB32E, User Manual

Search results

Summary of Contents for DB32E

Reviews:

Related manuals for DB32E

Brands by name

Popular brands