Samsung DB10E-POE User Manual Download

Page: 108 / 167

108

Network

Network Status

MENU

→

Network

→

Network Status

→

ENTER

You can check the current network and Internet status.

Network Status

Your wireless network and Internet connection are setup and ready to use.

You are connected to the Internet. If you have any problems using online services, please

contact your Internet service provider.

Retry

IP Settings

Disconnect

The displayed image may differ depending on the model.

Network Settings

MENU

→

Network

→

Network Settings

→

ENTER

Configure network settings to use various smart hub features such as Internet search, content sharing
through a home network and feature updates.

Network Settings

Select your network type.

Network type

Wireless

Wireless network

Refresh

WPS(PBC)

You can connect your
Device to the internet.
Please select which wireless
network to use.

The displayed image may differ depending on the model.

Network type

―

DB10E-T:

Wireless

Wired

―

DB10E-POE:

Wired

Chapter 10

Summary of Contents for DB10E-POE








































































































































































Search results

Summary of Contents for DB10E-POE

Reviews:

Related manuals for DB10E-POE

Brands by name

Popular brands

Samsung DB10E-POE, User Manual

Search results

Summary of Contents for DB10E-POE

Reviews:

Related manuals for DB10E-POE

Brands by name

Popular brands