Samsung DB10E-POE User Manual Download Page 129

Page: 129 / 167

129

Security

MENU

→

System

→

Security

→

ENTER

System

Safety Lock

Button Lock

USB Auto Play Lock

Off

The displayed image may differ depending on the model.

Safety Lock

―

Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".

If you want to change the PIN number, use the

Change PIN

function.

•

Off

All the menus and buttons of the product and remote control, except for the

LOCK

button on the remote control, will be

locked by the

Safety Lock

function.

To unlock the menus and buttons, press the

LOCK

button and then enter the password (default password: 0-0-0-0).

Power On Button

Turn on this feature to enable the remote control's Power button to turn on the device while

Safety Lock

is enabled.

•

Off

Button Lock

This menu can be used to lock the buttons on the product.
Only the remote control can control the product if

Button Lock

is set to

•

Off

USB Auto Play Lock

Select whether to automatically play

MagicInfo

content saved on a connected USB device.

•

Off

Play

MagicInfo

content saved on the USB device automatically.

•

Do not play

MagicInfo

content saved on the USB device automatically.

―

Connecting a USB device containing

MagicInfo

content displays "

USB Auto Play Lock : On

" for five seconds.

Power On Button

Summary of Contents for DB10E-POE








































































































































































Search results

Summary of Contents for DB10E-POE

Reviews:

Related manuals for DB10E-POE

Brands by name

Popular brands

Samsung DB10E-POE, User Manual

Search results

Summary of Contents for DB10E-POE

Reviews:

Related manuals for DB10E-POE

Brands by name

Popular brands