Allow an adequate space and install the fridge/freezer on a firm, level floor.
• If the appliance is not level, there may be unusual noises and poor cooling.
• Wait for at least one hour before plugging the appliance in.
Clean the fridge/freezer.
• Wipe and clean the appliance inside and outside with a damp cloth.
Plug the fridge/freezer into a wall socket used exclusively by this appliance.
• This appliance must be properly grounded.
Use of an grounded socket exclusively for the appliance:
• If you are using a socket with an earthing terminal, you do
not require a separate earthing connection.
Use of a non-grounded socket:
• Connect the “earthing wire” to the copper plate and bury it
at a depth of at least 2 cm in the ground.
If the front of the appliance is slightly higher than the rear, the door can be closed more easily.
Place the food in the fridge/freezer.
• It is recommended that you wait for the appliance to cool for 2-3 hours before storing food in it.
INSTALLING THE FRIDGE/FREEZER
6
Warning
LEVELLING
25cm
The appliance tilts down to the left.
Turn the left adjusting leg in the direction
of the arrow with a flat head screwdriver
until the appliance is level.
130º
950mm
595mm
1050m
m
600m
m
at least
0mm
Allow the enough space for opening
drawers.
Drawers can be easily opened with this
condition.
de
pth
w
ith
do
ors
op
en
ed
at least
0mm
The appliance tilts down to the right.
Turn the right adjusting leg in the direction
of the arrow with a flat head screwdriver
until the appliance is level.
DA99-01220J-EN-1(0.2).indd 6
2007.3.7 4:32:8 PM
