English
14
COnneCting tHe nfC fUnCtiOn
Connect your NFC compatible device via Bluetooth to the Wireless Audio with Dock using this simple set-up procedure
and play music on the device through the Wireless Audio with Dock.
external device
Connect
DOCK
DOCK
1.
Turn on the NFC function on the device and make sure the screen lock function on the device is off. The device's
NFC function will not work if screen lock is on.
2.
Gently touch the top of the Wireless Audio with Dock's top panel with the NFC supported device.
•
If the Wireless Audio with Dock is off, it will turn on automatically.
3.
A pop-up asking whether to proceed with the Bluetooth connection appears on the device. Select <
yes
>.
•
When the connection is complete, the 'connected' message appears.
4.
To disconnect the NFC device, touch the device to the Wireless Audio with Dock's top panel again. To connect
another NFC device while the first device is still connected, touch that device to the Wireless Audio with Dock's top
panel. The Wireless Audio with Dock will disconnect the first device and connect to the second device.
`
The NFC function is built into Android devices running Android OS 4.1.2 Jellybean or later.
-
If your device is running an Android OS earlier than Android OS 4.1.2 Jellybean, you must download the
'Samsung NFC Connection' application from Android market to use the NFC function.
`
The position of the NFC antenna differs on devices. Check where the NFC antenna is located before
connecting.
`
If your device is covered with a thick case, the connection may not succeed.
`
For further details on NFC tag location of an external device, refer to the manual of the device.
`
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other
countries.
`
To use NFC function, enable NFC read/write setting of the corresponding device before pairing.
`
If NFC pairing failed to establish Bluetooth connection, try again.
