24
▪
Do not disconnect the power or remove the USB drive while an upgrade is being applied. The main unit
will turn off automatically after completing the firmware upgrade.
▪
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪
If the firmware fails to upgrade, we recommend formatting the USB drive in the FAT16 format and then
trying again.
▪
For upgrading purposes, do not format the USB drive in NTFS format. It is not a supported file system.
▪
Depending on the manufacturer, the USB may not be supported.
▪
Disconnect the Wireless Audio with Dock from the Internet and any external devices before you upgrade
the software.
▪
You cannot charge other external devices through this USB port.
sOftWare UPgraDe (OnLy UsB MODe)
1
.
Visit www.samsung.com.
2
.
Click
SUPPOrt
on the top right of the page.
3
.
Enter the product's model number into the search field, and then click
Find
Product
.
4
.
Click
get downloads
in the Center of the page below the Downloads header.
5
.
Click
Firmware
in the Center of the page.
6
.
Click the
ZiP
icon in the File column on the right side of the page.
7
.
Click
OK
in the pop-up that appears to download and save the firmware file to
your PC.
8
.
Unzip the zip archive to your computer. You should have a single folder with the
same name as the zip file.
9
.
Copy the folder to a USB flash drive.
10
.
Touch the button on the front panel of the Wireless Audio with Dock
repeatedly until the
icon appears in the display. Insert the USB drive into
the USB port on the back panel of the unit.
11
.
The LED will blink during the Software update process. The product will turn off automatically after completing
the firmware upgrade.
•
It may take longer depending on the functions to upgrade. (Maximum 10 minutes)
• Turn on the product again.
ONLY FOR
SERVICE
AUX IN
DC 14V 4A
USB
5V 500mA
ONLY FOR
SERVICE
AUX IN
DC 14V 4A
USB
5V 500mA
