Samsung CS-29D5W Owner'S Instructions Manual Download Page 10

Page: 10 / 40

ENG

Plug & Play Feature

Plug & Play

Ant. Input : Check

Select Exit

Select Adjust Exit

Auto store

Area : ASIA W/EUROPE

Search : -/+

When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.

If the television is in Standby mode (red light visible on the
television front panel), press the POWER

button on the remote

control.

Result:

The message “Plug & Play” is displayed. It flickers for a
little while and then the “Language” menu is
automatically displayed.

Press the

▲

▼

button to select required language. Press the

MENU button to enter the language, and then the message “Ant.
Input : Check” is displayed.

➣

If any language is not selected on the “Language” menu, the
“Language” menu will be displayed about 30 seconds later.

Make sure that the antenna is connected to the TV. And then press
the

–

button.

Result:

The “Auto store” menu is displayed.

Select your country by pressing the

–

button. To search the

channels, select the “Search” by pressing the

▲

▼

button, and

then press the

–

button (refer to “Storing the Channels

Automatically” on page 13). Press the MENU button to skip.

Result:

The “Time” menu is displayed.

Press the

–

button to move to the hour or minute. Set the hour

or minute by pressing the

▲

▼

button (refer to “Setting and

Displaying the Current Time” on page 28).

When you have finished, press the MENU button.

Result:

The message “ENJOY YOUR WATCHING” is displayed,
and then the channel which has been stored will be
activated.

If you want to reset this feature...

Press the MENU button.

Press the

▲

▼

button to select the “Function”, and then

press the

–

button.

Select the “Plug & Play” by pressing the

▲

▼

button, and

then press the

–

button.

Result:

The message “Plug & Play” is displayed.

Select Adjust Exit

Time

Sleep : Off

Clock : -- : -- am

Select Enter Exit

Function

Language : English

Time

Plug & Play

Blue screen : Off

Demonstration

Select Enter Exit

Function

Language : English

Time

Plug & Play

Blue screen : Off

Demonstration

Timer

Summary of Contents for CS-29D5W









































Search results

Summary of Contents for CS-29D5W

Reviews:

Related manuals for CS-29D5W

Brands by name

Popular brands

Samsung CS-29D5W, Owner'S Instructions Manual

Search results

Summary of Contents for CS-29D5W

Reviews:

Related manuals for CS-29D5W

Brands by name

Popular brands