- 16 -
Parts
Explaination Photo
Explaination
Removal of
Damper Motor
1.
Remove the 2 screws holding the Damper Motor at
the top right. (You have to reassemble the Damper
Motor aligning the holes of the motor precisely for it
to operate properly.)
Removal of
Drive motor
1.
Take out the glass tray, guide roller from oven cavity,
disconnect power.
2.
Remove turn table motor cover from case bottom.
CAUTION :
Remove sharp edge after cover removal.
3.
Disconnect leads from drive motor.
4.
Remove 2 screws to take off drive motor.
5.
Lift out the Drive motor.
3-5 Replacement of Damper Motor & Drive Motor
