62
_ troubleshooting and error code
Electronic interference causes display to be reset.
• Disconnect the power plug and reconnect it. Reset the time.
Condensation appears inside the oven.
• This is a normal occurrence. Simply wipe away after cooking.
The fan continues to operate after the oven has been turned off.
• This is a normal occurrence. Cooling fan may continue to operate for up to
three minutes after oven has been turned off.
Air flow is detected around the door and outer casing.
• This is a normal occurrence.
Light reflection around the door and outer casing.
• This is a normal occurrence.
Steam escapes from around the door or vents.
• This is a normal occurrence.
A clicking sound occurs while the oven is operating, especially
in defrosting mode.
• This is a normal occurrence.
ERROR CODES
error code
General functions
temP seNsoR oPeN
In case the value of the temperature sensor is more than 250
°C during operation / cancellation.
temP seNsoR shoRt
In case the value of the temperature sensor is less than 5 °C
during operation / cancellation.
oveR 230 °c duRING oPeRAtIoN of mWo mode
In case the temperature rises over 230 °C during operation of
mwo mode (fire sensed).
dAmPeR s/W
In case it fails to sense the DAMPER to open or close for 1
minutes.
CP1370-B_XTL-03749V-01_EN.indb 62
21/12/2010 19:21:44