3
ENGLISH
ovEN
7
8
9
1
2
3
4
5
6
1.
HANDLE
2.
VENTILATION HOLES
3.
OVEN LAMP
4.
COOKING POWER CONTOL KNOB
5.
DOOR LATCHES
6.
DOOR
7.
CERAMIC PLATE
8.
SAFETY INTERLOCK HOLES
9.
TIMER KNOB
coNtRoL paNEL
2
3
1
1.
COOKING POWER CONTROL KNOB
2.
DEFROST
3.
TIMER KNOB
uSING tHIS INStRuctIoN bookLEt
You have just purchased a SAMSUNG microwave oven. Your Owner’s Instructions
contain valuable information on cooking with your microwave oven:
• Safety precautions
• Suitable accessories and cookware
• Useful cooking tips
• Cooking tips
IMpoRtaNt SafEty INfoRMatIoN
IMpoRtaNt SafEty INStRuctIoNS.
REad caREfuLLy aNd kEEp foR futuRE REfERENcE.
before using the oven, confirm that the following instructions are followed.
• Use this appliance only for its intended purpose as described in this instruction
manual. Warnings and Important Safety Instructions in this manual do not cover
all possible conditions and situations that may occur. It is your responsibility to
use common sense, caution, and care when installing, maintaining, and operating
your appliance.
• Because these following operating instructions cover various models, the
characteristics of your microwave oven may differ slightly from those described
in this manual and not all warning signs may be applicable. If you have any
questions or concerns, contact your nearest service centre or find help and
information online at www.samsung.com.
• This microwave oven is supposed for heating food. It is intended for domestic
home-use only. Do not heat any type of textiles or cushions filled with grains,
which could cause burns and fire. The manufacturer cannot be held liable for
damage caused by improper or incorrect use of the appliance.
• Failure to maintain the oven in a clean condition could lead to deterioration of the
surface that could adversely affect the life of the appliance and possible result in a
hazardous situation.
This product is a Group 2 Class B ISM equipment. The definition of group 2 which
contains all ISM equipment in which radio-frequency energy is intentionally generated and/
or used in the form of electromagnetic radiation for the treatment of material, and EDM
and arc welding equipment.
For Class B equipment is equipment suitable for use in domestic establishments and in
establishments directly connected to a low voltage power supply network which supplies
buildings used for domestic purposes.
CM1079_XEU-04031A_EN.indd 3
2011-07-11 6:44:48
