16
GB
1
Hold down
and then press
pad. Hold together for 2 seconds.
2
Select desired program code by using NUMBER pads.
3
Press NUMBER pads to set the magnification factor within the range from
1.00 to 9.99.
➢
Default factor is 1.65 preset from the manufacturer for increasing the
cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for
each memory code number.
4
Press button.
5
Press
pad to exit the programming mode.
➢
Though you can successfully set a double quantity factor whose
setting might result in excess of the maximum time allowed for each
power level, the oven does not operate exceeding the maximum
time.
Double Quantity Factor Editing
Double Quantity Pad Programming
Feature
Key Entry
Display
Remark
Hold down CANCEL and then
Hold down for 2 sec.
pad.
Code No.
After 1 sec, default value shows
in the display window.
(Input desired factor value.)
1.00 ~ 9.99 available
(Change the factor if required.)
If you don’t want to change
START
more, press CANCEL to exit
the editing mode.
New Code No.
Skip this step if not necessary.
(Input desired factor value.)
Skip this step if not necessary.
START
Skip this step if not necessary.
CANCEL
(Mode cancel)
This exits the editing mode.
Double Quantity
Factor Edit
+ 30sec
P
+ 30sec
START BUTTON
CM1029-EU-2 2/11/00 4:59 AM Page 16
