11
GB
Cooking/Reheating
This oven is preset at the factory for automatic operation.
1
Make sure the oven is plugged into a properly earthed electrical outlet and
“ON” appears in the display window.
2
Open the door.
The oven lamp will be turned on.
3
Put the food into a suitable container, place it in the centre of the oven and
then close the door securely.
Result:
The oven lamp will go off.
4
Select the desired power level by pressing the Power Level Selector pad.
Result:
The selected power level will be displayed in the display window.
5
Set the desired heating time by pressing the Number pads.
Result:
The selected time is displayed in the display window.
6
Press button:
Result:
The oven lamp and cooling fan will be turned on.
Heating will start.
The time on digital display will count down.
7
When all time is elapsed, the end of cycle Beep Tone will sound 4 times and
all heating will stop. The oven lamp will go off. For 1 min, the display shows
‘
‘ and the cooling fan will keep working in order to cool down the interior
parts. During the time, the fan will not stop even when you open the door. 1
min later it will stop and “ON” appears again. Food may be removed from
oven whilst the fan is still running.
8
Open the door and take the food out.
9
Close the door. The oven lamp will go off.
➢
Whilst in a heating cycle, one press on
pad stops the oven.
At this time, the Power Check Indicator “ON” starts blinking and
goes off when the
pad or
button is pressed again. You can
restart it by pressing the
button or a second press on
pad
will cancel the selected program. While NOT in a heating cycle,
one tap on
pad cancels the selected program.
You can press +30sec pad one or more times in order to add the
cooking time by 30 seconds. But you can not exceed the
maximum time per power level allowed for power level
selected.
P
P
START BUTTON
➢
When you first plug in the power cord, the oven
beeps once and all the indicators show for 5 sec
in the display window.
➢
When heating cycle is completed and you open
the door, the oven lamp automatically turns on
and goes off 1 min later.
➢
When you open the door whilst in a heating
cycle, the oven stops operating and the oven
lamp automatically turns on for 1 min and goes
off 1 min later. If you leave the oven door open
for more than 1 min, the oven beeps once every
minute and after 5 min the power source check
indicator ‘ON’ appears in the display window.
CM1029-EU-2 2/11/00 4:59 AM Page 11
