4.Servic
• Diagnostics > Adjustment > Scan Area Adjus
Purpose
To correct image position and m
function is used when a result o
expectation.
Operation
1
Choose one item from the
Operation
Procedure
1.
Choose one item from the
•
Image Position - Le
•
Image Position - Si
•
Magnification - Vert
2.
Select one item and press t
3.
Change the adjustment valu
4.
Image Position (
ⓐ
,
ⓑ
) : If t
press “+”. Otherwise, press
5
Magnification (
ⓒ
) : If the cu
5.
Magnification (
ⓒ
) : If the cu
“-”. Otherwise, press “+”.
6.
Press the “OK” button to ap
Example
Cases
ⓐ
= 11.0 mm
* Note that value of magnificati
ⓑ
= 9.0 mm
ⓒ
= 191.7 mm
ⓒ
= 188.1 mm
size, 420mm ((190mm + 10mm
Verification
1.
Scan the Scanner A/S Cha
from the scan glass.
2.
To check the image positio
the chart to the copy.
3.
To check the magnification,
copy .
Specification
ⓐ
,
ⓑ
: 10 ,
±
1.5mm
ⓒ
: 190 ,
±
1.5mm
Image Position Unit: mm, Scale
Magnification Unit: %, Scale: 0.
Reference
Figure 5-3
Service Manual
CLX-9250/9350 series
4-3
ce Mode
stment > Manual Adjustment
magnification of scanned images manually. This
of automatic adjustment does not satisfy the
e table There are three items to choose
e table. There are three items to choose.
eading Edge
de Edge
tical Direction
the “Edit” button.
ue with arrow button.
the current value is smaller than the specification,
s “-”.
urrent value is smaller than the specification press
urrent value is smaller than the specification, press
pply the new value to the system.
Leading
Edge
Side
Edge
Vertical Direction
Adjustment
-10
on adjustment needs to be calculated based on A3
+10
+0.8% (-3.4mm)
-0.4% (near +1.8mm)
m*2)*2) if the used Scanner A/S Chart is A4 size.
rt and send it to a PC. Scanning must be occur
on, compare the position of scale marks (
ⓐ
,
ⓑ
) of
, compare the length of line
ⓒ
of the chart to the
e: 0.1, Min/Max: -6/+6
1(0.42mm), Min/Max: 99/101
SAMSUNG ELECTRONICS
34
