Copying
_ 5
1.
Press
(Copy)
on the control panel.
2.
Place originals, face up, in the document feeder. Or you can use the
scanner glass with a single original document face down and closed the
scanner lid.
3.
Press
Menu
on the control panel.
4.
Press the up/down arrow to highlight
Copy Feature
and press
OK
.
5.
Press the up/down arrow to highlight
WaterMark
and press
OK
.
6.
Press the up/down arrow until the binding
Message
option you want is
highlighted and
OK
.
7.
Press the up/down arrow until the binding
Pages
option you want is
highlighted and
OK
.
8.
Press
Stop/Clear
to return to ready mode.
9.
Press
Start
to begin copying.
Copying both sides of the originals
You can set the machine to print copies on both sides of paper.
The
Duplex
options may vary between document feeder or scanner
glass.
1.
Press
(Copy)
on the control panel.
2.
Place originals, face up, in the document feeder. Or you can use the
scanner glass with a single original document face down and closed the
scanner lid.
3.
Press
Duplex
on the control panel.
4.
Press the up/down arrow until the binding option you want is highlighted.
•
Off:
Prints in normal mode.
•
1->2Side Short:
Prints pages to be read by flipping like a note pad.
2
5
3
•
1->2Side Long:
Prints pages to be read like a book.
•
2->1Side:
Scans both sides of the originals and prints each of one on a
separate sheet.
•
2->2Side:
Scans both sides of the original and prints on both sides of
the paper. This function produces exactly the same print out from the
originals.
•
2->1Side ROT2:
Scans both sides of the original and prints each one
on a separate sheet, but the information on the back side of the
printout is rotated 180°.
5.
Press
OK
to save your selection.
6.
Start copying a document.
Setting copy timeout
You can set the time the machine waits before it restores the default control
panel settings, if you press
Start
button prior to the control panel restoring
to default, the previous job will be reprinted.
1.
Press
Menu
on the control panel.
2.
Press the up/down arrow to highlight
System Setup
and press
OK
.
3.
Press the up/down arrow to highlight
Machine Setup
and press
OK
.
4.
Press the up/down arrow to highlight
Timeout
and press
OK
.
5.
Press the up/down arrow until the time setting you want is highlighted.
Selecting
Off
means that the machine does not restore the default
settings until you press
Start
to begin copying, or
Stop/Clear
to cancel.
6.
Press
OK
to save the selection.
7.
Press
Stop/Clear
to return to ready mode.