Samsung CLP-600 Series Service Manual Download Page 126

Page: 126 / 255

Troubleshooting

Samsung Electronics

Service Manual

7-3

7.1.2 Initial Inspection

1. Check Power part

1. The printer does not work no matter how long you wait.

A. Is the Power Switch (printer and wall socket) turned on ?

B. Is the Power Cord connected to the printer correctly ?

C. Is the Power cord connected to the wall socket correctly ?

D. Is wall socket working ?

E. Is the unit rated at the same voltage as the supply ?

2. Does the Fan work when power is turned on?

A. Check the connectors on the SMPS.

B. Check the fuses in the SMPS.

C. Check any error message display on the LCD panel and refer to the troubleshooting section 7.5

2. Check the Installation Environment.

1. Ensure the installation surface is flat, level and free from vibration.

If necessary move the printer.

2. Ensure that the temperature and humidity of the surroundings are within specification

If necessary move the printer.

3. Ensure that the printer is position away from any air conditioning or other heating or cooling equipment. Also ensure

that is not positioned in a direct draft from any air conditioning, fan or open window.

If necessary move the printer.

4. Ensure the printer is not positioned in direct sunlight.

If it is unavoidable use a curtain to shade the printer.

5. Ensure the printer is installed in a clean dust free environment.

Move the printer to clean area if necessary.

6. Some industrial or cleaning processes give of fumes which can affect the printer.

Move the printer away from this type of air pollution

3. Check paper type.

1. Use only paper which is of a suitable quality, weight and size?

See the user guide.

4. Check the overall condition of the printer

1. Is the printer properly maintained ?

Clean the Paper Transport Passages.

Any rollers with dirt surfaces should be cleaned or replaced.

Summary of Contents for CLP-600 Series
































































































































































































































































Search results

Summary of Contents for CLP-600 Series

Reviews:

Brands by name

Popular brands

Samsung CLP-600 Series, Service Manual

Search results

Summary of Contents for CLP-600 Series

Reviews:

Brands by name

Popular brands