Samsung CLP-600 Series Service Manual Download Page 113

Page: 113 / 255

Samsung Electronics

Service Manual

Alignment and Adjustmens

6-18

Message

Description

• Press to switch between on-line and off-line.

• In menu mode, press to return to ready mode.

The color of the On Line/Continue button indicates the status of the printer.

Blanking

Green

Red

Off

The printer is on-line and can receive data from the computer.

• When the light blinks slowly, the printer is receiving data from the

computer.

• When the light blinks quickly, the printer is receiving and printing

data.

Check the display message or SmartPanel. for details on the
meaning of the error message.

A minor error has occurred and the printer is waiting for the error to
be cleared. Check the display message or SmartPanel. When the

problem is cleared, the printer resumes printing. If you want to

ignore this warning, press this button.

• The printer is off-line and cannot print.

• The printer is in Power Save mode. When data is received, it switches to on-line

automatically.

Summary of Contents for CLP-600 Series
































































































































































































































































Search results

Summary of Contents for CLP-600 Series

Reviews:

Brands by name

Popular brands

Samsung CLP-600 Series, Service Manual

Search results

Summary of Contents for CLP-600 Series

Reviews:

Brands by name

Popular brands