Samsung CLP-325 Series Service Manual Download Page 87

Page: 87 / 129

Alignment & Troubleshooting

Service Manual

4-30

Samsung Electronics

Description

The printer prints, but the text is wrong, garbled, or incomplete.

The printer cable is

loose or defective.

Disconnect and reconnect the

printer cable. Tr

y a print job that you

have already printed successfully. If

possible, attach the cable and

printer to another computer and try

a print job that you know works.

Finally, try a new printer cable.

The software

application is malfunctioning.

ry printing a job from another

application.

The operating system

is malfunctioning.

Exit Windows and reboot the

computer. Turn the printer off and

then back on again.

The wrong printer

driver was selected.

Check the application's printer

selection menu to ensure that your

printer is selected.

Summary of Contents for CLP-325 Series


































































































































Search results

Summary of Contents for CLP-325 Series

Reviews:

Brands by name

Popular brands

Samsung CLP-325 Series, Service Manual

Search results

Summary of Contents for CLP-325 Series

Reviews:

Brands by name

Popular brands