manualshive.com logo in svg

Samsung CLP-325 Series, Service Manual

Share
Download
Samsung CLP-325 Series Service Manual Download Page 76

Alignment & Troubleshooting

Service Manual

4-19

Samsung Electronics

Item

Discription

Cover

If cover is opened, " Opened“ message will be displayed. 
If not, "Closed" message will be.

Tray1 Empty

If paper exists in the tray, "With Paper" will be displayed.  

If not, "Without Paper" message will be.

Tray2 Empty

If paper exists in the tray, "With Paper" will be displayed.  

If not, "Without Paper" message will be.

4.1.6.3(b) Solenoid Test

Item

Discription

LSU Motor

If LSU motor lock signal is normal, "Successed" message will be displayed. 
When LSU motor lock signal is abnormal , “failed” message will be displayed. 
When “Upper Level” is pushed, “off” message will be displayed.

LSU Power

When “select” key is pushed, “LSU Power On” message will be displayed. 
If not, “LSU Power Off” message will be.

Laser Diode

When select key is pushed, Laser Diode On message will be displayed.
If not, Laser Diode Off message will be.

Eraser

When select key is pushed, Eraser On message will be displayed .
If not, Eraser Off message will be.

Fuser

When select key is pushed, Fuser On message will be displayed.
If not, Fuser Off message will be.

Summary of Contents for CLP-325 Series


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands