manualshive.com logo in svg

Samsung CLP-325 Series, Service Manual

Share
Download
Samsung CLP-325 Series Service Manual Download Page 84

Alignment & Troubleshooting

Service Manual

4-27

Samsung Electronics

Description

A print job is extremely slow.

The job may be very complex.

Reduce the complexity of the

page(s) or try adjusting the print

quality settings.

Adjust the print quality settings,

such as reducing the resolution. If

you have set the resolution to 

2400dpi [Best], change it to 1200dpi 

[Normal] or 600dpi [Draft]. See the 

Software section.

Change the port setting to the USB 

or network port to improve print 

speed. Your printer prints 

A4-sized 

paper at 16 ppm in black and white 

mode and 4 ppm in color mode.

If using Windows 98/Me, the 

Spooling Setting may be set

incorrectly.

From the Start menu, choose

Settings and Printers. Right-click

the Samsung CLP-31x series

printer icon, choose Properties,

click the Details tab, and then

choose the Spool Settings button.

Select the desired spool setting.

Summary of Contents for CLP-325 Series


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands