manualshive.com logo in svg

Samsung CLP-320 Series, Service Manual

Share
Download
Samsung CLP-320 Series Service Manual Download Page 107

Alignment & Troubleshooting

Service Manual

4-50

Samsung Electronics

4.2.5 Common Windows Problems

NOTE:  

Refer to the Microsoft Windows 98/Me/NT 4.0/2000/2003/XP User’s Guide that came with your PC 

for further information on Windows error messages.

"File in Use" message appears 

during installation.

Exit all software applications. Remove all 

software from the StartUp Group, then 

restart Windows. Reinstall the printer driver.

"Error W

riting to LPTx" 

message appears.

 Ensure that all cables are connected 

 correctly and the printer is on.

 If bi-directional communication is not 

 turned on in the driver, it will also cause 

 this message.

"General Protection Fault", 

"Exception OE", "Spool32", or "Illegal  

Operation" messages

appear.

Close all other applications, reboot 

Windows and try printing again.

"Fail To Print", "A printer 

timeout error occurred." 

messages appear.

These messages may appear during printing. 

Just keep waiting until the printer finishes 

printing. If the message appears in standby 

mode or after printing has been completed, 

check the connection and/or whether an 

error has occurred.

Summary of Contents for CLP-320 Series


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands