background image

1

.2

C

HAPTER

O

NE

: Y

OUR

N

EW

TV

Y

O U R

N

E W

T V

Familiarizing Yourself with The TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.

Œ

TV/VIDEO

Press to change between viewing TV programs
and signals from other components.

´

MENU

Press to see an on-screen menu of your TV's fea-
tures.

ˇ

VOLUME – , +

Press to increase or decrease the
volume. Also used to select items on the on-
screen menu.

¨

CH 

and CH 

Press to change channels. Also press to highlight
various items on the
on-screen menu.

ˆ

POWER & TIMER indicator

(Models CL-14A8L/CL-15A8L/CL-21A8W/CL-21A8L/
CL-21A9W/CL-15A8W/CL-25M6W/CL-25M6P/ 
CL-21S8W)

When the TV is turned on, the POWER & TIMER
indicator blinks ten times. This indicator illumi-
nates when theTIMER mode is set to the “On”
position after setting the clock and either the On
timer or Off timer, with the remote control. Even if
the power is turned off, this indicator stays lit.
(Clock must be set before using this function.)

Ø

STAND BY & TIMER LAMP 

(Models CL-25A6W/CL-25A6P/CL-25K4W

)

• When on/off time is set, this lamp will be lighted 

(Green/Red).

• When TV set is on, this lamp will be flicker ten 

times (Green).

Remote Control Sensor

Aim the remote control towards this spot on the
TV.

POWER

Press to turn the TV on and off.

For models CL-14A8L/CL-15A8L/
CL-21A8W/CL-21A8L/CL-21A9W/
CL-15A8W

For models CL-25A6W/CL-25A6P/
CL-25K4W

For models CL-25M6W/CL-25M6P

For model CL-21S8W

01191C(E)-CHAPTER 1  10/11/05  7:23 PM  Page 2

Summary of Contents for CL-14A8L

























































Reviews: