background image

C

HAPTER

F

OUR

: S

PECIAL

F

EATURES

4

.11

S

P E C I A L

F

E AT U R E S

Extra sound settings (Turbo Sound, Surround,  or Auto Volume )

• Turbo Sound

Turbo sound emphasizes the bass and treble frequencies to add fullness to the sound.

• Surround

Your TV can create a “Surround” effect such that the sound seems to come from all direc-
tions.  Once the “Surround” is set to “On” or “Off”, the setting applies to the sound
effects such as Standard, Music, Movie and Speech. 

• Auto Volume

Each broadcasting station has its own signal conditions, which can make it necessary to
adjust the volume every time the channel is changed. “Auto volume” lets you automati-
cally adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is
low.

2

Press 

VOL +

to select

the Sound menu. 

Press 

CH

twice to

select “Turbo sound”.

3

Press 

VOL +

to select

“On”.

Press 

MENU 

twice to

exit

1

Press 

MENU

to display

the menu. 

Press 

CH

once to

select the “Sound”
menu.

You can set Surround and Auto volume as the same way of setting Turbo
sound.

a

01191C(E)-CHAPTER 4  10/11/05  7:19 PM  Page 11

Summary of Contents for CL-14A8L

























































Reviews: