2
.5
C
HAPTER
T
WO
: I
NSTALLATION
4
le
g.
u-
I
N S TA L L AT I O N
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
VCR and the antenna
terminal on the TV.
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks on the TV.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Note: For a Mono VCR, connect the Audio jack to Audio L on the TV. Press the
TV/Video button to switch to the A/V mode. To hear the sound from both speakers,
select MTS Mono from the Sound Menu. (For models CL-14A8L/CL-15A8L/CL-21A8L)
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
01191C(E)-CHAPTER 2 10/11/05 7:22 PM Page 5
