1. Remove the outer panel.
2. Disconnect all the connectors and terminals on
the heater and noise filter assembly.
3. Unscrew nuts securing the grill heater.
1. Disconnect all lead wires from the interlock
monitor switch and the door sensing switch.
2. Push up the mounting tabs.
3. Make necessary adjustments Do the microwave
emission check according to "ALIGNMENT
AND ADJUSTMENTS" on page 5-2(whenever
they any repaired or replaced).
1. Disconnect all lead wires from the primary
interlock switch.
2. Push up the mounting tabs which support the
primary interlock switch.
3. Make necessary adjustments and microwave
emision check according to "ALIGNMENT
AND ADJUSTMENTS" on page 5-2(whenever
they are repaired or replaced).
4-7 Replacement of Grill Heater
4-8 Replacement of Interlock Monitor Switch and Door Sensing Switch
4-9 Replacement of Primay Interlock Switch
4-4
Samsung Electronics
Disassembly and Reassembly
Interlock Switch Replacement
When replacing defective switches, be sure to
check that the mointing tabs are not bent or
broken.
GRILL
HEATER
SCREW
PLATE SRRING
BRACKET HEATER
Primary Interlock S/W
Lever Switch
Interlock Monitor S/W
Door Sensing S/W
Body Latch
Guide S/W
