Samsung C32G3 T Series User Manual Download Page 4

Installation

Warning

Caution

4

 DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT 

INSTALL THE PRODUCT NEAR HEAT SOURCES. 

 Do not install the product in poorly ventilated spaces such as a bookcase or closet. 

 Install the product at least 10cm away from the wall to allow ventilation. 

 Keep the plastic packaging out of the reach of children. 

Children may suffocate. 

 Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) 

The product may fall and become damaged and/or cause an injury. 

Using the product in an area with excess vibration may damage the product or cause a fire. 

 Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or 

smoke. 

 Do not expose the product to direct sunlight, heat, or a hot object such as a stove. 

The product lifespan may be reduced or a fire may result. 

 Do not install the product within the reach of young children.

The product may fall and injure children. 

 Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a 

kitchen or near a kitchen counter. 

Do not drop the product while moving.

Do not set down the product on its front.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the 

product is not protruding.

 The product may fall and become damaged and/or cause an injury.

  Install the product only on cabinets or shelves of the right size.

Set down the product gently.

  Product failure or personal injury may result.

Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, 

extreme temperatures or a significant presence of moisture, or a place where the product will 

operate continuously for an extended period of time) may seriously affect its performance.

  Be sure to consult Samsung Customer Service Centre if you want to install the product at such a 

place.

Before assembling the product, place the product down on a flat and stable surface so that the 

screen is facing downwards.

  The product is curved. Placing pressure on the product when on a flat surface may damage the 

product. When the product is on the ground facing up or down, do not put pressure on it. 

 

 

Summary of Contents for C32G3 T Series






























Reviews: