background image

SPECIFY SERVICE INSTRUCTIONS AND WARRANTY 

TERMS

FCC Caution :

Any Changes or modifications not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment. 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions : 
(1)  This device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired operation.

Note

 :  

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is 

no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and monitor.

•  Connect the equipment into an outlet on a circuit different from that to which the monitor is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.

WARNING

•  STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords 

within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC 

Adapters provided.

•  Some adult assembly or installation required.

•  This product contains small parts that may cause choking. Keep small parts away from children.

•  This product is NOT intended to replace proper supervision of children. You MUST check your 

child’s activity regularly, as this product will not alert parents to silent activities of a child.

•  Before using this product, read and follow all instructions contained in this booklet, and read and 

follow all instructions and warnings on the product. 

•  NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet 

basement, etc.

•  This product is intended for indoor use only.

•  This product is not intended for use as a medical monitor and its use should not replace adult 

supervision.

•  The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a 

child. If the child moves outside of this range, if may not be able to detect sounds from him or her.

•  It is essential that you check the operating range and condition of the transmitter monitor on initial 

installation, and on a regular basis after that.

•  Check reception regularly. Test monitor before use and after changing camera location.

The wireless signal transfer range may be shortened if an obstacle such as a 

concrete wall is in between the camera and monitor.

•  To prevent overheating, keep the product and AC power adapters away from any direct sunlight 

and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and 

other appliances that produce heat (e.g., amplifiers, televisions and stereos).

•  Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that 

may block ventilation.

•  Use only the AC adapters provided with the product, as other adapters may damage the product. 

Plug the adapters only into standard household current (100~240 volts AC).  

Place the AC adapters avoiding pinch points otherwise you can damage the adapters.

•  When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC 

adapter’s cord.

•  Do not use extension cords with the AC power adapters to avoid entanglement.

•  This product should only be serviced by qualified and authorized Samsung service centers.

•  Images and sounds are transmitted by the product over public airwaves and transmissions may 

be picked up by other units.

•  Caution if you use the system to watch a young child, do not place the camera where the child 

can reach.

•  When using the system with only battery power and the charge is low, then the picture and or 

sound may affected.

•  If this occurs then please connect the AC power adapter. 

CAUTION

Risk of explosion if battery is replaced by an incorrect type. 

Dispose of used batteries according to the instructions.

Summary of Contents for BrilliantVIEW SEW-3041W/EX




















Reviews: