Samsung BQ1 Series, User Manual

Page: 24 / 84

24
_side runners
BuLB eXcHange
Danger of electric shock! Before replacing any of the oven bulbs, take the following
steps:
• Switch oven Off.
•
Disconnect the oven from the mains.
•
Protect the oven light bulb and the glass cap by laying a cloth on the bottom of the oven
compartment.
• Bulbs can be purchased from the SAMSUNG Service Centre.
rear oven lamp
1.
Remove cap by turning anticlockwise and remove the metal ring,
the sheet ring and clean the glass cap. If necessary, replace the
bulb with a 25 watt, 230 V, 300 °C heat-resistant oven light bulb.
2. Clean the glass cap, the metal ring and the sheet ring if
necessary.
3. Fit the metal and the sheet ring to the glass cap.
4.
Place glass cap where you have removed it in step 1 and turn it
clockwise to keep it in place.
oven side light (Optional)
1. To remove the glass cover, hold the lower end with one hand,
insert a flat sharp implement such as a table knife between the
glass and the frame.
2.
Pop out the cover.
3. If necessary, replace the halogen bulb with a 25-40 watt, 230 V,
300 °C heat resistant halogen oven light bulb.
Tip: Always use a cloth when handling a halogen bulb to
prevent sweat from fingers being deposited on the bulb
surface.
4. Reattach the glass cover.
BQ1D4T007_XFA_DG68-00191P-01_EN.indd 24 18/4/2556 19:43:57