Samsung SRP-500 Setup & Service Information Driver Installation Information
•
5
Windows 98 Driver Settings
1. From your Windows desktop, select
Start
, then
Settings
, and then
Printers
.
2. From the printers dialog, right click the
SRP-500
driver and choose
Properties
.
3. From the Generic / Text Only dialog box, click the
Additional Commands
tab:
4. At the
BeginDoc
field, type the command to print the logo, for example:
\xlb\x67\x01
to print logo1. To print a logo, you must also download the bitmap image to flash
memory. See “SRP-500 StoreMaker Utility” on page 13.
5. At the
EndDoc1
field, type the command to print the logo, for example:
\xlb\x67\x02
to print promotion2. To print a promotion , you must also download the bitmap image
to flash memory. See xxx
6. Make additional selections for drawer opening and paper cutting as necessary.
7. Click
OK
to save the new settings.
Type command to print
a logo here.
Type command to print
promotion here.
Check to cut receipt
Check to select if cash
drawer(s) to open.
Enter the number of
feed lines after print
Without paper feeding?
